Please watch this you tube video for detailed instructions
1. Cut Pieces
-
Pocket: 1 piece – Use sample: approx. 6.5" x 6.5" square
-
Pocket flap: 2 pieces – 6.5" x 2.5"
-
Interfacing: 1 flap piece
2. Prepare the Pocket
-
Press top edge of pocket down ½", then again ½"
-
Stitch along the folded edge
-
Press the remaining seam allowance:
-
½" on both sides
-
½" on the bottom
-
3. Attach Pocket to Coat
-
Place pocket on the coat front
-
Pin in place
-
Topstitch the sides and bottom at ⅛" and again at ¼" (double topstitch line)
4. Make the Pocket Flap
-
Interface 1 flap piece
-
Place right sides together
-
Sew around sides + curved/straight bottom (leave top open)
-
Turn and press
-
Topstitch all around
5. Attach Pocket Flap
-
Place flap above the pocket, right side down
-
Sew along the top edge
-
Flip flap down
-
Press and topstitch the join seam
6. Add Snaps
-
Add 2 snaps to pocket flap + pocket
-
Use the center of each pocket side as placement
-
Install with snap pliers or hammer tool
-
-
-